FactSage 8.4 - Summary of Databases
Each database below links to its own section on this page. Overview of databases explains how they are built and how the compound and solution databases work together.
Compound databases
FACT package
Coupled compound & solution databases
- FToxid oxides — slags, glasses, ceramics, refractories
- FTsalt salts
- FTsulf sulfides
- FThall Hall–Héroult aluminium
- FThelg aqueous (Helgeson)
- FTmisc miscellaneous — sulfides, alloys
- FTpulp pulp and paper, corrosion and combustion
- FTfrtz fertilizers, explosives
- FTOxCN oxycarbonitrides, high temperature
- FTionX ionic organics
General FactSage database documentation
Overview of databases
The Fact and FactSage databases are the largest set of evaluated and optimized thermodynamic databases for inorganic systems in the world. The solution databases (for solutions of oxides, salts, metals, etc.) have all been developed by evaluation and "optimization" of data from the primary literature. Based on proper thermodynamic models for every phase, all available thermodynamic and phase equilibrium data for a system are evaluated simultaneously in order to obtain one set of model equations for the Gibbs energies of all phases as functions of temperature and composition. In such an "optimization", all data are rendered self-consistent, discrepancies in the data can often be resolved, and the data can be properly interpolated and extrapolated. In particular, properties of multicomponent solutions can usually be estimated with good accuracy from the optimized model parameters of their binary and ternary sub-systems. The resulting database of model parameters can be used for calculating phase equilibria and thermodynamic properties using the FactSage Gibbs energy minimization software.
FactSage accesses both "solution" databases and "pure compound" databases. The former contain the optimized parameters for solution phases. The latter contain the properties of stoichiometric compounds, either obtained from optimizations or taken from standard compilations.
FactPS - FACT pure substances database
- contains data for 5203 compounds (pure substances) comprising 7373 phases.
- contains data from standard compilations as well as most of the data for those compounds which have been evaluated / optimized to be thermodynamically consistent with the FACT FToxid, FTsalt, FThall, ... etc. solution databases (see below).
- FactPS database further information:
SGPS - SGTE pure substances database
- contains data for 3927 compounds (pure substances) compiled by the SGTE groups.
- in general these data are not necessarily thermodynamically consistent with the SGTE solution databases.
- SGPS database further information:
FToxid - FACT oxide database
- contains data for all pure oxides and oxide solutions (solid and liquid) formed among Al2O3, CaO, FeO, Fe2O3, MgO, SiO2.
- includes various combinations of the above oxides with oxides of As2O3, B2O3, BaO, CoO, CrO, Cr2O3, Cu2O, GeO2, K2O, Li2O, Na2O, MnO, Mn2O3, NiO, P2O5, PbO, SnO, SrO, TiO2, Ti2O3, VxO, ZnO, ZrO2.
- includes data for Al2O3-Re2O3 systems, where Re = La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu.
- includes data for the oxyfluoride system Ca, Mg, Li, Na, K, Al, Si // O, F up to high fluoride concentrations with minor amounts of Fe, Cr, Mn, S.
- The liquid/glass solution phase is called FToxid-Slag. FToxid-Slag includes dilute solutions of SO4, H2O/OH, PO4, CO3, Cl, I and solutions of S and F up to approximately 50% fluorides and sulfides (and up to 100% for some systems).
- FToxid database further information:
- General description,
- List of solutions and compounds,
- Description of solutions
- Calculated phase diagrams.
NOTE: FToxid is part of the FACT package of solution databases and can not be purchased separately.
The FactSage Viscosity module can be used to calculate viscosities of oxide liquid/glass solutions containing most of the important components of FToxid.
FTsalt - FACT salt database
- contains data for pure salts and salt solutions formed among various combinations of the 29 main cations Li, Na, K, Rb, Cs, Mg, Ca, Sr, Ba, Mn, Al, Fe(II), Fe(III), Co, Ni, Zn, Pb, La, Ce, Th, U(III), U(IV), Pu(III), Pu(IV), Cr(II), Cr(III), Mo(V), Hg, Hg2 and 15 main anions F, Cl, Br, I, NO2,NO3, ClO4, OH, CO3, SO4, S2O7, CrO4, Cr2O7, MoO4, Mo2O7. The molten salt phase is called FTsalt-Salt.
- FTsalt-Salt molten phase includes dilute solutions of O2- and OH-.
- FTsalt database further information:
- General description,
- List of compounds and solutions,
- Description of solutions,
- Calculated phase diagrams.
NOTE: FTsalt is part of the FACT package of solution databases and can not be purchased separately.
FTsulf - FACT sulfide database
- The FACT FTsulf database may be used for nearly all calculations involving sulfide solutions for applications involving equilibria among metal, liquid and solid sulfide phases, liquid and solid oxide phases, and gas. The database contains data for sulfide solutions and for three metal solutions (liquid, bcc, fcc) which are compatible with the sulfide solutions. The database contains data for stoichiometric sulfide, sulfate and arsenide compounds optimized to be consistent with the FTsulf solutions. Oxygen solubility in the liquid sulfide phase is taken into account. The database is consistent with the FToxid and FSstel databases (except for the liquid metal, fcc and bcc phases which should be selected from FTsulf.
- The FTsulf database should NOT be used simultaneously with the FTLite, FScopp or FSlead databases.
- The elements included in the FTsulf database are:Cu, Fe, Ni, Co, Cr, Mn, Pb, Zn, As, O , S.
- FTsulf database further information:
- General description,
- List of compounds and solutions,
- Description of solutions,
- Calculated phase diagrams.
FThall - FACT Hall-Héroult aluminum database
- contains data for all pure substances and 17 solution phases formed among Al-Mg-Na-Li-Ca-F-O-C. The molten cryolite phase is called FThall-bath and the molten alloy phase is called FThall-liq.
- FThall database further information:
- General description,
- List of solutions and compounds,
- Description of solutions,
- Calculated phase diagrams.
NOTE: FThall is part of the FACT package of solution databases and can not be purchased separately.
FThelg - FACT aqueous (Helgeson) database
- FThelg database contains infinite dilution properties for over 1400 aqueous solute species taken from the GEOPIG-SUPCRT Helgeson public database and include the Helgeson equation of state for temperatures up to 350 °C and pressures up to 165 bar. The data are stored as 3 aqueous solutions FThelg-AQID, -AQDH, -AQDD.
- FThelg-AQID assumes an ideal dilute solution and is generally valid up to approx. 0.001 molal.
- FThelg-AQDH incorporates the Debye-Huckel equation, and is generally valid up to approximately 0.02 molal.
- FThelg-AQDD incorporates the extended Debye-Huckel (Davies) equation and is generally valid up to 0.5 molal.
- FThelg pure compound database contains data for 185 pure solid compounds and gases which are thermodynamically consistent with the FThelg aqueous solution database.
- FThelg database further information:
NOTE: FThelg is part of the FACT package of solution databases and can not be purchased separately.
FTmisc - FACT miscellaneous databases for sulfides, alloys, etc.
- the system S-Cu-Fe-Mn-Ni-Co-Cr. Most solutions and stoichiometric phases have been removed from FTmisc to create the FTsulf sulfide database new to FactSage 8.2.
- the matte smelting system S-Cu-Fe-Ni-Co-Pb-Zn-As. This system has been superseeded by the new FTsulf database, which provides equally good or better results for most applications.
- liquid Fe with dilute solutes Ag, Al, B, Ba, Bi, C, Ca, Ce, Co, Cr, Cs, Cu, H, Hf, La, Mg, Mn, Mo, N, Nb, Nd, Ni, O, P, Pb, Pd, S, Si, Sn, Sr, Ta, Th, Ti, V, W, Zn, Zr. [FTmisc-FeLQ]
- liquid Sn with dilute solutes Al, Ca, Ce, Co, Cr, Cu, Fe, H, Mg, Mo, Na, Ni, O, P, S, Se, Si, Ti [FTmisc-SnLQ]
- liquid Pb with dilute solutes Ag, As, Au, Bi, Cu, Fe, Na, O, S, Sb, Sn, Zn [FTmisc-PbLQ]
- the Hg-Cd-Zn-Te system
- alloy solutions FTmisc-ZnLQ, -CdLQ, -TeLQ, -SbLQ, -SeLQ, -SeTe, -SbPb and –PbSb are alloy solutions of a limited number of components, valid over limited composition ranges.
- non-ideal aqueous solution of 96 solutes with Pitzer parameters [FTmisc-PITZ].
- FTmisc database further information:
- General description,
- List of solutions and compounds,
- Description of solutions,
- List of optimized systems and phase diagrams,
- Calculated phase diagrams.
NOTE: FTmisc is part of the FACT package of solution databases and can not be purchased separately.
FTpulp - FACT pulp and paper database
- contains data for the pulp and paper industry (as well as for corrosion and combustion applications) for the system
Na, K // Cl, SO4, CO3, O, OH, S2O7, S, S2 ... S8.
- FTpulp database further information:
- General description,
- List of solutions and compounds,
- Description of solutions,
- Calculated phase diagrams.
NOTE: FTpulp is part of the FACT package of solution databases and can not be purchased separately.
FTfrtz - FACT fertilizer database
- FTfrtz is used for the production of nitrate-based fertilizers, from hydrous to anhydrous conditions. It can also be used for calculating the thermodynamic properties and phase equilibria in the fertilizer products, and for some explosives.
- The FTfrtz compound and solution databases contain data for 26 pure salts and 14 salt solutions based on the family of ammonium nitrate (NH4NO3), ammonium di-hydrogen phosphate (NH4H2PO4), ammonium chloride (NH4Cl) and ammonium sulfate ((NH4)2SO4). fertilizers with additions of their corresponding potassium salts (and in some cases sodium salts). The model covers the addition of roughly up to 50 wt.% water (H2O).
- FTfrtz database further information:
NOTE: FTfrtz is part of the FACT package of solution databases and can not be purchased separately.
FTOxCN - FACT oxycarbonitride database
- contains data for performing equilibrium calculations in the Al-(Si-Ca-Mg-Fe-Na)-C-O-N-S system at very high temperatures.
- FTOxCN database further information:
NOTE: FToxcn is part of the FACT package of solution databases and can not be purchased separately.
FTionX - FACT ionic organics database
FTionX is devoted to ionic organics systems. Currently, it contains only "ionic liquid" compounds (also called "room temperature molten salts"). Ionic liquids have a low temperature of fusion (with an upper limit usually set arbitrarily to 100 °C) They consist of organic cations (which are large and asymmetric), and organic or inorganic anions. Work is in progress on Deep Eutectic Solvent (DES) systems for future versions of FactSage.
The database contains data for pure ionic organics compounds and ionic organics solutions of 8 cations: [C3MIm], [C4MIm], [3MPip], [C3MPy], [C3MPyrr], [C4MPyrr], [C2Py], [C4Py] where C3MIm = 1-propyl-3-methyl-imidazolium, C4MIm = 1-butyl-3-methyl-imidazolium, C3MPip = 1-propyl-1-methyl-piperidinium, C3MPy = 1-propyl-3-methyl-pyridinium, C3MPyrr = 1-propyl-1-methyl-pyrrolidinium, C4MPyrr = 1-butyl-1-methyl-pyrrolidinium, C2Py = 1-ethyl-pyridinium, and C4Py = 1-butyl-pyridinium.
and 6 anions: Cl, Br, BF4, NO3, CH3SO3, PF6.
In FTionx 8.4 there are currently 14 ionic organics compounds, 4 different liquid solutions, and 7 different solid solutions.
NOTE: FTionX is part of the FACT package of solution databases and can not be purchased separately.
- FTionX database further information:
- General description,
- List of solutions and compounds,
- Description of solutions,
- Calculated phase diagrams.
FTlite - Al-alloy, Mg-Alloy and Ti-alloy database
- The FTlite Database is designed for thermodynamic and phase equilibrium calculations involving Al alloys, Mg alloys and Ti alloys. Calculations involving Li-Na-K-Mg-Ca-Sr-Ba mixtures with several other elements can also be performed. The density, viscosity and surface tension of the liquid phase can be computed for most important elements.
Al Alloys Ag, Al, As, Au, B, Ba, Be, Bi, C, Ca, Ce, Co, Cr, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, H, Hf, Ho, In, K, La, Li, Lu, Mg, Mn, Mo, N, Na, Nb, Nd, Ni,O, P, Pb, Pr, Pt, Sb, Sc, Si, Sm, Sn, Sr, Ta, Tb, Ti, Tm, V, W, Y, Yb, Zn, Zr Mg Alloys Ag, Al, B, Ba, Be, Bi, C, Ca, Ce, Co, Cr, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, H, Ho, In, K, La, Li, Lu, Mg, Mn, Na, Nb, Nd, Ni, O, Pb, Pr, Pt, Sb, Sc, Si, Sm, Sn, Sr, Tb, Ti, Tm, V, Y, Yb, Zn, Zr . Ti Alloys Ag, Al, B, Ba, C, Ca, Ce, Co, Cr, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, H, Ho, K, La, Li, Lu, Mg, Mn, Mo, N, Na, Nb, Nd, Ni, O, Pr, Sc, Si, Sm, Sn, Sr, Ta, Tb, Ti, Tm, V, W, Y, Yb, Zn, Zr .
- A total of 1017 binary systems have been evaluated, most of them over the entire range of composition and for all stable phases. Several dozen ternary systems have been assessed, and important quaternary systems have also been evaluated. The database contains 324 solution phases and 2304 pure compounds (with 2806 stoichiometric phases counting allotropic forms).
- FTlite database further information:
- General description,
- List of solutions and compounds,
- Description of solutions,
- Calculated phase diagrams.
FTnucl - FACT nuclear database
The FACT FTnucl database has been developed for the nuclear industry. It contains data for pure substances and solutions containing the following elements:
Th, U, Np, Pu, Am
+ Zr, Fe, Ru, Ba + Li, Na, K, Rb, Cs + C, N, O, I + He, Ne, Ar, Kr, Xe, Rn
The database can be used for the development of advanced nuclear fuels base on:
- Th, U, Np, Pu and Am
- Oxides
- Carbides, nitrides and carbo-nitrides
- Metals
It can also be used for estimating the thermodynamic behavior and phase relationships involving fission products (based on Cs. I, Zr, Ru, Ba and Rb, and including noble gases and metallic claddings (Fe, Zr, C).
- FTnucl database further information:
FScopp - FactSage copper alloy database
- is directed primarily to Cu-rich alloys, but is intended to permit calculations over all ranges of compositions. It includes the elements Ag, Al, As, Au, B, Be, Bi, C, Ca, Cd, Ce, Co, Cr, Fe, Ga, Ge, H, Hg, In, La, Li, Mg, Mn, Mo, Na, Nb, Nd, Ni, O, P, Pb, Pd, Pt, S, Sb, Se, Si, Sn, Te, Ti, Tl, V, W, Zn, Zr.
- the database is generally valid for the temperature range of approximately 25 to 2200 °C.
- a total of 685 binary systems and several dozen ternary and quaternary systems have been evaluated. The database contains 330 solution phases, 1471 pure compounds and 1891 stoichiometric phases counting allotropic forms.
- FScopp information:
FSlead - FactSage lead alloy database
- is directed primarily to Pb-rich alloy, but is intended to permit calculations over all ranges of compositions. It includes the elements: Ag, As, Au, Ba, Bi, C, Ca, Cd, Cu, Fe, Ga, Ge, H, Hg, In, Ni, O, S, Sb, Se, Si, Sn, Sr, Te, Tl, Zn.
- is intended to provide a sound basis for calculations relating to lead production and refining.
- is generally valid for the temperature range of approximately 25 to 2200ºC.
- a total of 238 binary systems and several dozen ternary and quaternary systems have been evaluated. The database contains 127 solution phases, 434 pure compounds and 641 stoichiometric phases counting allotropic forms.
- FSlead information:
FSstel - FactSage steel database
- contains data for 380 completely assessed and 61 partially assessed binary alloy systems, 168 ternary and 29 quaternary systems that include the elements Al, B, Bi, C, Ca, Co, Cr, Cu, Fe, H, Hf, Mg, Mn, Mo, N, O, Nb, Ni, P, Pb, S, Sb, Si, Sn, Ta, Ti, V, W, Zn, Zr, RE (Sc, Y, La, Ce, Pr, Nd, Sm Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu).
- The database contains 181 solution phases and 1015 stoechiometric compounds.
- is intended to provide a sound basis for calculations covering a wide range of steel production processes, e.g.
- phase diagrams and phase transitions in a wide range of commercial steel compositions including stainless steels, and new advanced steels under development
- conditions for heat treatment operations to produce a desired constitution
- chemical reaction to reduce oxygen, sulphur, phosphorous, and hydrogen concentration levels in liquid steel through refining process in liquid state: sometime combinations of FSStel, FTOxid and FactPS database are necessary
- understanding galvanizing bath chemistry and formation of intermetallic layers in galvanizing and galva-annealing process using conventional Zn bath and new AlMg bath
- conditions for scrap remelting to maintain as low concentrations as possible of undesirable “tramp elements”
- understanding of oxidation (PO2-X diagram) and corrosion (EpH diagram) of steel in conjunction with FTOxid, FactPS, FTmisc, and FTHelg databasemelt-crucible interactions
- etc.
- FSstel information:
FSupsi - FactSage ultrapure silicon database
- is directed primarily to the liquid state of Si-rich alloys, with the particular aim of enabling calculation of impurity concentration levels in ultra-pure silicon.
- includes the following elements as impurities in liquid silicon: Ag, Al, Au, B, Bi, C, Ca, Co, Cr, Cu, Fe, Ge, H, Hf, In, Li, Mg, Mn, Mo, N, Ni, O, P, Pb, Ru, Sb, Sn, Ta, Te, Ti, V, W, Y, Zn, Zr. The elements included in the Si-rich solid solution are B, C, Ge, N, Sn, Ti, Zn. All other elements are treated as insoluble in solid Si.
- FSupsi information:
SGTE 2024 - SGTE alloy database
The 79 elements included in the database are,
Ag, Al, Am, As, Au, B, Ba, Be, Bi, C, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, H, Hf, Hg, Ho, In, Ir, K, La, Li, Lu, Mg, Mn, Mo, N, Na, Nb, Nd, Ni, Np, O, Os, P, Pa, Pb, Pd, Pr, Pt, Pu, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Tc, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn, Zr
From among these elements, there are some 880 completely assessed binary alloy systems. The database also includes about 154 ternary and 20 higher-order systems for which assessed parameters are available for phases of practical relevance. The systems incorporate 466 different solution phases and 1917 compound phases (mainly stoichiometric intermetallics).
- SGTE information:
SGsold - SGTE solders database
- This is a database from SGTE for alloy systems involving the following elements which are components of lead-containing and lead-free solders : Ag, Au, Bi, Cu, In, Ni, Pb, Pd, Sb, Sb, Zn. The systems incorporate 67 solution phases and 74 stoechiometric phases.
- SGsold information:
BINS - SGTE(2017) free alloy database
- This is the SGTE free binary alloy database which comprises some 109 of the BINARY systems taken from the SGTE(2017) alloy database.
- BINARY information:
SpMCBN - The Spencer Group database for carbide, nitride, boride and silicide systems
- The Spencer Group Non-Oxide Refractories Database, SpMCBN, contains assessed thermodynamic parameters for binary and ternary alloys of high-temperature materials containing carbon, nitrogen, boron, and silicon. The alloys include Me1-Me2-C, Me1-Me2-N, Me1-Me2-B, Me1-Me2-Si, Me-C-N, Me-C-B, Me-C-Si, Me-N-B, Me-N-Si, Me-B-Si and Me1-Me2-Me3 systems.
- includes the elements B, C, N, Si with Al, Ca, Co, Cr, Fe, Hf, Mg, Mn, Mo, Nb, Ni, Re, Sc, Ta, Tc, Ti, V, W, Y, Zr.
- While no data for oxide systems have been included in the database, a number of the elements listed above are important in refractory oxide materials. Reactions of the carbide, nitride, boride and silicide systems with such refractory oxides and with oxygen-containing gas atmospheres can be calculated using FactSage by selecting the SpMCBN database together with appropriate combinations of the FToxid, FactPS and SGPS databases for the materials in question.
- SpMCBN information:
SGnobl - SGTE noble metal alloy database
- The database contains evaluated thermodynamic parameters for 223 binary and 130 ternary alloys of Ag, Au, Ir, Os, Pd, Pt, Rh, Ru alloyed amongst themselves and also in alloys with the metals Al, As, B, Ba, Be, Bi, C, Ca, Cd, Ce, Co, Cr, Cu, Dy, Fe, Ge, Hf, In, Mg, Mo, Nb, Ni, Pb, Re, Sb, Si, Sn, Ta, Tc, Te, Ti, Tl, V, W, Zn, Zr.
- Noble metals and their alloys have a wide variety of applications, and calculations of relevant phase equilibria in a particular case are important e.g. for optimizing suitable alloy compositions or predicting reaction products in chemically aggressive environments.
- SGnobl information:
- General description,
- List of optimized systems and phase diagrams,
- List of compounds and solutions,
- Calculated phase diagrams.
TDnucl and TDmeph nuclear databases developed by IRSN
- TDnucl allows the user to calculate the thermochemical equilibrium state at any step of a severe accident and to use the results of the thermodynamic approach for improving the predictions of thermo-hydraulic or other accidents codes. The database covers the following 18+2 elements : O, U, Zr, Ag, In, B, C, Fe, Cr, Ni, Ba, La, Sr, Ru, Al, Ca, Mg, Si + Ar, H and including the 15 oxides: UO2, ZrO2, In2O3, B2O3, FeO, Fe2O3, Cr2O3, NiO, BaO, La2O3, OSr, Al2O3, CaO, MgO, SiO2. It covers the entire field from metal to oxide domains.
- TDmeph is a specially developed database for new generation nuclear fuels containing 14+2 elements : O, U, Pu, Zn, Fe, Si, C, Ba, Ce, Cs, La, Mo, Ru, Sr + Ar, H.
Both databases are developed by Institut de Radioprotection et de Sûreté Nucléaire (IRSN) in France and converted for use with FactSage by GTT Technologies
Applications are numerous and include:
- condensed state phase diagrams, transitions, liquidus/solidus, compositions and proportions,
- coupling thermodynamics and thermo-hydraulic, viscosity, segregation, residual power distribution,
- gaseous fission products release in any external conditions …etc
- TDnucl information:
- TDmeph information:
General FactSage Database Documentation
- All FactSage databases: Detailed Documentation and Information.